Factory oem door bumpers.
Replaces GM Part 7637192
Sold as a set of (4).
Bumper Specifications:
Height: 1 1/16" (26 mm)
Length: 1 1/16" (26 mm)
Thickness: 5/8" (16 mm)
Point to Point: 1/2" (13 mm)
BEFORE YOU PURCHASE, PLEASE SEE PICTURE #2 (REFERENCE CHART) AS GM MADE 2 DIFFERENT SIZES BUT LOOK VERY SIMILAR.
NOTE: TYPICALLY THE LARGER BUMPERS ARE FOUND ON OLDER APPLICATIONS AND THE SMALLER BUMPERS ARE FOUND ON NEWER APPLICATIONS.
FAILURE TO VERIFY AND PURCHASE THE WRONG BUMPERS COULD CAUSE DAMAGE TO YOUR DOOR AND DOOR JAMB.
IF THIS BUMPER IS TOO BIG AND YOU NEED THE SMALLER BUMPER (GM PART# 4564974), CLICK HERE
These rubber door bumpers are located on the outside edge of your inner door jam. Over time, these door stops break off or lose their softness to crush which causes damage and misalignment. They prevent the door from metal to metal contact when the door is slammed shut. The bumpers also maintain a proper gap alignment which is extremely important.
Most applications use 2 bumpers per door (upper and lower). If you have 4 doors, you will need to purchase 2 sets.
DISCLAIMER: DUE TO MID YEAR PRODUCTION CHANGES AND CUSTOM APPLICATIONS, WE STRONGLY URGE YOU TO VERIFY THE SIZES OF YOUR EXISTING HARDWARE PRIOR TO PURCHASING TO AVOID UNWANTED RETURN SHIPPING CHARGES.
